Materials Testing Equipment Catalogue
Browse concrete, soils, aggregates, asphalt, sieving and civil engineering testing equipment by category, product code and standards.
Equipment categories
- 387
- 513
- Aggregates
- Asphalt and Bitumen
- Balances
- Calibration and Measurement
- Cement, Lime and Mortar
- Chemicals
- Concrete
- Environment and Meteorological
- Glass and Plastic Ware
- Miscellaneous Equipment and Hardware
- Mobile Laboratories
- Ovens and Furnaces
- Rock
- Sieving
- Soil and Geotechnical
- Steel Testing
- Test Chambers
- Test Sets to International Standards
- Thermometers, Probes and Thermocouples
Products (4037)
- Galvanised Steel Curing Tank Large 240V - CN060 (CN060) — Internal Dimensions 1600 x 900 x 600 The CN060 Large Galvanised Steel Curing Tank is a robust and practical solution for the controlled water curing of concrete
- Galvanised Steel Curing Tank Medium 110V (CN064) — Internal Dimensions 1200 x 600 x 600 Will Accept: 42 x 150mm or 100 x 100mm cubes Supplied complete with: Bottom rack Heater Thermostat Click to view a PDF file
- Galvanised Steel Curing Tank Medium 240V (CN063) — Internal Dimensions 1200 x 600 x 600 Will Accept: 42 x 150mm or 100 x 100mm cubes Supplied complete with: Bottom rack Heater Thermostat Click to view a PDF file
- Galvanised Steel Curing Tank Small 110V (CN066) — Internal Dimensions 600 x 600 x 600 Will Accept: 18 x 150mm or 50 x 100mm cubes Supplied complete with: Bottom rack Heater Thermostat Click to view a PDF file o
- Galvanised Steel Curing Tank Small 240V (CN065) — Internal Dimensions 600 x 600 x 600 Will Accept: 18 x 150mm or 50 x 100mm cubes Supplied complete with: Bottom rack Heater Thermostat Click to view a PDF file o
- Gauging Trowel (MH260) — 175mm long steel blade
- General Purpose Hydrometer 1.00 to 1.50 °SG (AG233) — 0.005 divisions, 250mm long Manufactured fro soda glass with steel shot ballast & synthetic wax resin. Length: 250mm Bulb diameter: 14mm Range: 1.00 to 1.50 °SG
- General Purpose Hydrometer 1.00 to 1.50 °SG with UKAS (AG233/N) — 0.005 divisions, 250mm long, supplied with UKAS calibration certificate Manufactured fro soda glass with steel shot ballast & synthetic wax resin. Length: 250mm
- General Purpose Moisture & Damp Meter (TH180) — with general purpose two-pin probe Compact, general purpose moisture meter designed for building professionals to check the moisture content in a variety of con
- Geological Hammer (AG183) — with chisel edge Forged from a special chrome vanadium steel which has been correctly hardened and tempered, with the head fully polished. The striking face and
- Gillmore Apparatus (CE135) — to ASTM C91, ASTM C141, ASTM C266, AASHTO T154 The Gillmore Apparatus is used to determine the setting time of cement. The vertical support shaft has a device t
- Glass Beads 250micron/180micron, 5kg (BM556) — for EN Sand Patch Material Safety Data Sheet available in PDF format
- Glass Bottle 500ml (AG205) — 500ml capacity
- Glass Calibration Check Beads 0.0 to 0.050mm diameter (SV100) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.040 to 0.070mm diameter (SV102) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.070 to 0.110mm diameter (SV104) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.090 to 0.150mm diameter (SV106) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.100 to 0.200mm diameter (SV108) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.150 to 0.250mm diameter (SV110) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.200 to 0.300mm diameter (SV112) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.250 to 0.500mm diameter (SV114) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.400 to 0.600mm diameter (SV116) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.500 to 0.750mm diameter (SV118) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following
- Glass Calibration Check Beads 0.750 to 1.000mm diameter (SV120) — 1kg pack, to be used for performance checks together with a set of master sieves. Material Safety Data Sheet available in PDF format Impact offer the following