Materials Testing Equipment Catalogue
Browse concrete, soils, aggregates, asphalt, sieving and civil engineering testing equipment by category, product code and standards.
Equipment categories
- Aggregates
- Asphalt and Bitumen
- Balances
- Calibration and Measurement
- Cement, Lime and Mortar
- Chemicals
- Concrete
- Environment and Meteorological
- Glass and Plastic Ware
- Miscellaneous Equipment and Hardware
- Mobile Laboratories
- Ovens and Furnaces
- Rock
- Sieving
- Soil and Geotechnical
- Steel Testing
- Test Chambers
- Test Sets to International Standards
- Thermometers, Probes and Thermocouples
Products (4036)
- Redox Meter (SL369) — with test leads, holster, manual and 9V battery (installed). The SL369 displays true-rms voltage and current readings with 6000 count resolution, tests diodes,
- Reference Calibration Thermometer - WO005 (WO005) — Reference Calibration Thermometer for calibration testing: The Reference Calibration Thermometer is a high-precision thermometer designed for verifying and test
- Reference Sand I (Coarse) (CE093) — for Blaine Apparatus - specific surface: approx. 2830 cm²/g - density: approx. 2.65 g/cm³ - porosity: 0.50 - approx. 125 g
- Reference Sand II (Fine) (CE094) — for Blaine Apparatus - specific surface: approx. 4000 cm²/g - density: approx. 2.65 g/cm³ - porosity: 0.50 - approx. 125 g
- Relative Density Basket BS to BS812 EN1097-6 (AG108) — 200 x 200mm 1.70mm mesh to BS812-2
- Relative Density Basket BS to BS812 EN1097-6 (AG110) — 200 x 200mm 3.35mm mesh to BS812-2
- Replacement Mould 100mm diameter x 60mm high (CE152/1) — for CE152 Flow Table to EN1015-3
- Replacement Tamper 200mm long x 40mm diameter (CE152/2) — for CE152 Flow Table to EN1015-3
- Residual strength using small ring shear to BS1377 part 7/6 (BS1377-7/6) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1377 part 7 - additional items may b
- Resistance of fragmention - Impact test to EN1097-2IT (EN1097-2IT) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1097 part 2 - additional items may b
- Resistance of fragmention - Los Angeles test to EN1097-2LA (EN1097-2LA) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1097 part 2 - additional items may b
- Resistance to freezing & thawing to EN1367-1 (EN1367-1) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1367 part 1 - additional items may b
- Resistance to hardening, influence of heat & air to EN12607-3 (EN12607-3) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN12607 part 3 - additional items may
- Resistance to hardening, influence of heat to EN12607-1 (EN12607-1) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN12607 part 1 - additional items may
- Resistance to wear (Micro Deval) to EN1097-1 (EN1097-1) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1097 part 1 - additional items may b
- Resistance to wear by abrasion from studded tyres Nordic test to EN1097-9 (EN1097-9) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN1097 part 9 - additional items may b
- Retort Stand Base 250mm x 160mm (MH391) — steel, supplied without rod Rectangular Retort Stand Bases Steel with rod hole tapped 10mm x 1.5mm in the short side and rubber feet. Stand supplied will be whi
- Retort Stand Clamp (MH405) — 3 prong alloy with rubber covered jaws, 8mm diameter rod With three prong rubber covered jaws. Accepts articles up to 70mm. Rod 8mm diameter.
- Retort Stand Ring 100mm internal diameter, 116mm external diameter (MH412) — mild steel with plain stem
- Retort Stand Rod, 760mm long x 12.5mm diameter (MH395) — zinc steel With screw end 10mm x 1.5mm.
- Retort Stand Rod, steel, 1000mm long x 12.5mm diameter (MH396) — zinc steel With screw end 10mm x 1.5mm.
- Retort Stand Single Burette Clamp (MH410) — Polypropylene Spring loaded, with rubber grips on the arms and a central boss to allow mounting on rods from 11 to 14mm diameter.
- Retort Stand Straight Bosshead (MH400) — alloy, for rods up to 16mm diameter
- Reusable Cable Ties (MH007) — 250mm long pack of 100 - Can be opened with one hand - Inside serrated - Operating temperature ranging between -40°C and 85°C - Releasable and reusable - Simple