Materials Testing Equipment Catalogue
Browse concrete, soils, aggregates, asphalt, sieving and civil engineering testing equipment by category, product code and standards.
Equipment categories
- Aggregates
- Asphalt and Bitumen
- Balances
- Calibration and Measurement
- Cement, Lime and Mortar
- Chemicals
- Concrete
- Environment and Meteorological
- Glass and Plastic Ware
- Miscellaneous Equipment and Hardware
- Mobile Laboratories
- Ovens and Furnaces
- Rock
- Sieving
- Soil and Geotechnical
- Steel Testing
- Test Chambers
- Test Sets to International Standards
- Thermometers, Probes and Thermocouples
Products (4036)
- TLS-100 (SL975) — Thermal conductivity / thermal resistivity meter. Product Information: The TLS-100 (Transient Line Source) is a portable instrument designed to measure the ther
- TR150 Digital Readout Unit (SL755) — Compatible with most Strain Gauge Based Sensors & Transducers This is a completely portable, precision instrument packaged in a small, robust IP65 (NEMA 4) encl
- Tamping Rod to BS1881 & EN12350-2 (CN011) — 16mm diameter x 600mm long. The Slump Cone Tamping Rod is a precision-made steel rod designed specifically for use in concrete slump testing. Used to compact co
- Tamping Rod to BS812-110 (AG161) — for 75mm ACV to BS812:110
- Temperature Data Logger - SL708 (SL708) — -35 to +80°C (-31 to +176°F) range. The USB Temperature Data Logger is a compact and easy-to-use device designed for monitoring and recording temperature data
- Tempos Thermal Properties Meter Kit (SL752) — All the attached comes as a kit. SL752 INCLUDES THE FOLLOWING: TEMPOS THERMAL PROPERTIES METER Accuracy: ± 10% Measurement speed: 1, 2, 5, & 10 min. read times
- Ten percent fines value (TFV) - also required to BS812 part 111 (BS812-111AR) — This additional set of items may be required to carry out the test using the method described in BS812 part 111
- Ten percent fines value (TFV) to BS812 part 111 (BS812-111) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS812 part 111 - additional items may
- Tensile splitting strength of cylinders - also required (BS1881-117AR) — This additional set of items may be required to carry out the test using the method described in BS1881 part 117
- Tensile splitting strength of cylinders to BS1881 part 117 (BS1881-117) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1881 part 117 - additional items may
- Tensile splitting strength to EN12390-6 (EN12390-6) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN12390 part 6 - additional items may
- Testing & classifying drying shrinkage of to BS812 part 120 (BS812-120) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS812 part 120 - additional items may
- Testing & classifying drying shrinkage- also required to BS812 part 120 (BS812-120AR) — This additional set of items may be required to carry out the test using the method described in BS812 part 120
- Testing Anvil for N/NR/L/LR Silver Schmidt (CN671) — for use with Silver Schmidt test hammers N/NR/L/LR
- Testing Anvil for type N/Nr concrete test hammers (CN670) — 150mm diameter x 320mm, to EN 12504:2 Anvil shown with test hammer for information only, test hammer supplied separately For the verification of test hammer cal
- Testing Concrete in Structures, Cored Specimens to EN12504-1 (EN12504-1) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in EN12504 part 1 - additional items may
- Testo Anemometer (MT148) — vane anemometer with built-in NTC air thermometer Data Vane anemometer with built-in NTC air thermometer, including protective cap, batteries and calibration pr
- Theoretical Maximum Specific Gravity to ASTM D2041 (ASTMD2041) — This set of equipment has been put together to list what is necessary to carry out the test using the method described in ASTMD2041 - additional items may be re
- Therma 3 Industrial Thermometer (Unit Only) (TH051) — Accurate, long-lasting digital thermometer for industrial applications. The Therma 3 Industrial Digital Thermometer is an affordable, easy-to-use instrument des
- Therma 3 Industrial Thermometer - TH053/N (TH053/N) — Digital Thermometer 1°C With Probe. Supplied with 4 point UKAS certificate (0, 20, 30, 110°C). The Digital Thermometer 1oC With Probe is a professional industri
- Therma-Hygrometer - hygrometer thermometer (MT225) — range -49.9 to 69.9 °C & 20 to 99 %rh This therma-hygrometer simultaneously displays both the humidity and temperature in addition to indicating and recording t
- Therma-Hygrometer - hygrometer thermometer supplied with UKAS calibration certificate (MT225/N) — range -49.9 to 69.9 °C & 20 to 99 %rh This therma-hygrometer simultaneously displays both the humidity and temperature in addition to indicating and recording t
- ThermaData Humidity USB Data Logger with Digital Display (MT107) — Accurate temperature & humidity logging. The ThermaData Humidity USB Data Logger with Digital Display is a compact, high-precision device designed for accurate
- Thermapen pocket digital thermometer 0.1 ° C resolution (TH060) — range -49.9 to 299.9 °C, with penetration probe The Thermapen thermometer incorporates a large digital display with a precise read-out of temperature over the r